From 126704d5c379421bb7c8857b71c9d7ae9247c4fd Mon Sep 17 00:00:00 2001 From: BryanMartinMirandaLeal Date: Sun, 6 Jul 2025 22:09:04 +0000 Subject: [PATCH] README File --- README.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/README.md b/README.md index 307f5fa..7e899c6 100644 --- a/README.md +++ b/README.md @@ -7,4 +7,31 @@ measured, but these printed numeric data to be separated by commas so that it tu the printed information into a .CSV file, since this is the most common format used for data analysis with the Python language tools we work with. +## I2C address and device list +![i2c address](21.png) + +![device list](22.png) + +In the code lines 21 to 25, we have added instructions for the conductivity and dissolved oxygen circuits, including +also the I2C addresses corresponding to each one of them. In this case, we have removed the instruction for the pH +circuit since this parameter at the end was not considered as representative in the specific application that was being +developed. + +In the code lines 27 to 33, the names of the conductivity and dissolved oxygen circuits are added to the _device list_ +so that we can refer to them using their corresponding names. + +## Enable pins in the microcontroller + +![enable_pins_1](23.png) + +![enable_pins_2](24.png) + +In the line 41 of the code, we need to set the pin number needed for our dissolved oxygen circuit, corresponding +with the connection this circuit will have with the ESP32 microcontroller. + +In the **setup** function, we also need to set up the **pinMode** for the added circuits, specifically if they need +to have a **LOW** or **HIGH** digital value in the corresponding circuit. + +## step3 function +hh