Gas-Sensors
/
Sayeth-Tesis-Repo
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
main
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
Sayeth-Tesis-Repo/codes
History
Sayeth f3fd3c9232 backup from gitlab 1 month ago
..
README.md backup from gitlab 1 month ago
config-uart-pins.sh backup from gitlab 1 month ago
daq backup from gitlab 1 month ago
daq.c backup from gitlab 1 month ago
daq.h backup from gitlab 1 month ago
data.dat backup from gitlab 1 month ago
main.c backup from gitlab 1 month ago
uart.c backup from gitlab 1 month ago
uart.h backup from gitlab 1 month ago

README.md

DAQ System with Beaglebone Black using serial communication

This repositori contains a DAQ program and its C code source to implement a DAQ system with a Beaglebone Black using serial communication with sensors. Sensors used in this system are: GC-0017 (Cabron dioxide), CM-31910 (Carbon monoxide, and temperature) and OX-0052 (Oxigen).

Installing

To get this repositore you just need to clone it into your Beaglebone Black

git clone https://gitlab.com/sayeth.rd/daq-serial-bbb/

Utilization

Configure UART1, UART2 and UART4 ports with this command

config-uart-pins.sh

Connect sensors to power supply and Beaglebone like next diagram. Diagrama conexiones

Then you can run the program wih this comand*:

./daq <daq duration(h)> <sampling period(s)>

*replace <daq duration(h)> with the total data acquisition time (in hours), and <sampling period(s)> with the time between each measurements acquisition (in seconds).

If you need to recompile the progam you can use gcc program from the terminal.