diff --git a/README.md b/README.md
index 7aafb99..a4088b4 100644
--- a/README.md
+++ b/README.md
@@ -5,7 +5,7 @@ Sensors used in this system are: GC-0017 (Cabron dioxide), CM-31910 (Carbon mono
 
 ### Installing
 
-To get this repositore you just need to clone it to your Beaglebone Black
+To get this repositore you just need to clone it into your Beaglebone Black
 
 ```
 git clone https://gitlab.com/sayeth.rd/daq-serial-bbb/
@@ -13,19 +13,17 @@ git clone https://gitlab.com/sayeth.rd/daq-serial-bbb/
 
 ### Utilization
 
-To run this code and commincate with sensors, you first have to configure UARTs ports, configuring GPIOs as uart running the command
+Configure UART1, UART2 and UART4 ports with this command
 ```
 config-uart-pins.sh
 ```
-this command will configure UART1, UART2 and UART4.
 
-Then you can run the code wih this comand:
+Connect sensors to power supply and Beaglebone like in the next diagram.
+![Diagrama conexiones](/images/conexion_sensores.png)
 
-```
-./daq
-```
+Then you can run the code wih this comand*:
 
-If you need to make any changes to the code you can recompile again with this command:
 ```
-gcc daq.c -o daq
+./daq <time> <sampling period>
 ```
+*change < time> and < sampling period> with your own values.
\ No newline at end of file
diff --git a/images/.gitkeep b/images/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/images/conexion_sensores.png b/images/conexion_sensores.png
new file mode 100644
index 0000000..f2dda75
Binary files /dev/null and b/images/conexion_sensores.png differ