diff --git a/epwm_cpu1_bitfield/epwm_cpu1_bitfield_main.c b/epwm_cpu1_bitfield/epwm_cpu1_bitfield_main.c index ef03ee3..b4df26c 100644 --- a/epwm_cpu1_bitfield/epwm_cpu1_bitfield_main.c +++ b/epwm_cpu1_bitfield/epwm_cpu1_bitfield_main.c @@ -1,10 +1,11 @@ /* Gerardo Marx 21/Oct/2026 Objective: -- ePWM1 (ePWM1A and ePWM1A) and ePWM2 will be controlled CPU1 +- ePWM1 (ePWM1A and ePWM1B) and ePWM2 will be controlled CPU1 - ePWM4 and ePWM5 will be controlled CPU2 - CPU1: ePWM1 (GPIO0 and GPIO1 outputs), up-count, 10KHz, and D=0.4 - CPU1: ePWM2 (GPIO2 and GPIO3), up-down, 5KHz, and m=-0.3 + - CPU2: ePWM4 (GPIO6 and GPIO7), up-count, 15KHz, and D=0.6 - CPU2: ePWM5 (GPIO8 and GPIO8), up-down, 4KHz, and m=+0.7 */ @@ -72,26 +73,63 @@ void main(void) EPwm1Regs.TBPRD = 5000-1; // 10KHz sawtooth EPwm2Regs.TBPRD = 5000; // 5KHz triangular - - - - + //Counter-compare submodules + EPwm1Regs.CMPCTL.bit.SHDWAMODE = 0; //shadow mode + EPwm1Regs.CMPCTL.bit.LOADAMODE = 0; //zero + EPwm1Regs.CMPA.bit.CMPA = 1999; // 0.4 of the duty + EPwm2Regs.CMPCTL.bit.SHDWAMODE = 0; + EPwm2Regs.CMPCTL.bit.LOADAMODE = 0; + EPwm2Regs.CMPA.bit.CMPA = (uint16_t)((-0.3+1)/2.0*5000); + // 6. Configure AQ and dead band. + // Action qualifier submodule + // ePWM1 - A output to be fed to the upper device of a leg + // ePWM1 - B output to be feb to the lower device + // TBCTR = 0 -> A = 1 and B = 0 (ZRO and AQCTLA/B) + EPwm1Regs.AQCTLA.bit.ZRO = 2; // A = 1 @ 0x00 + EPwm1Regs.AQCTLB.bit.ZRO = 1; // B = 0 @ 0x00 + // TBCTR = CMPA -> A = 0 and B = 1 (CAU - AQCTLA/B) + EPwm1Regs.AQCTLA.bit.CAU = 1; // A = 0 @ TBCTR = CMPA up count + EPwm1Regs.AQCTLB.bit.CAU = 2; // B = 1 @ TBCTR = CMPA up count + + // ePWM2 - A output to be fed to the upper device of a leg + // ePWM2 - B output to be feb to the lower device + // TBCTR = CMPA first -> A = 1 and B = 0 (CAU and AQCTLA/B) + EPwm2Regs.AQCTLA.bit.CAU = 2; //A = 1: TBCTR = CMPA up count + EPwm2Regs.AQCTLB.bit.CAU = 1; //B = 0: TBCTR = CMPA up count + // TBCTR = CMPA second -> A = 0 and B = 1 (CAD and AQCTLA/B) + EPwm2Regs.AQCTLA.bit.CAD = 1; //A = 0: TBCTR = CMPA down count + EPwm2Regs.AQCTLB.bit.CAD = 2; //B = 1: TBCTR = CMPA down count + // 7. Configure event trigger and trip-zones. + // TODO + // 8. Register and enable interrupts. + // NA + // 9. Configure PWM GPIOs, diagnostic pin, and X-BAR + EALLOW; + GpioCtrlRegs.GPAGMUX1.bit.GPIO0 = 0; + GpioCtrlRegs.GPAMUX1.bit.GPIO0 = 1; // epwm1A + GpioCtrlRegs.GPAGMUX1.bit.GPIO1 = 0; + GpioCtrlRegs.GPAMUX1.bit.GPIO1 = 1; // epwm1B + GpioCtrlRegs.GPAGMUX1.bit.GPIO2 = 0; + GpioCtrlRegs.GPAMUX1.bit.GPIO2 = 1; // epwm2A + GpioCtrlRegs.GPAGMUX1.bit.GPIO3 = 0; + GpioCtrlRegs.GPAMUX1.bit.GPIO3 = 1; // epwm2B + EDIS; - // 6. Configure AQ and dead band. - // 7. Configure event trigger and trip-zones. - // 8. Register and enable interrupts. - // 9. Configure PWM GPIOs, diagnostic pin, and X-BAR // 10. Confirm fault condition and syncronize startup. + // Start the timer counters for ePWM 1 and 2 + EALLOW; + CpuSysRegs.PCLKCR0.bit.TBCLKSYNC = 1; + EDIS; for(;;) { }