Gas-Sensors
/
daq-bbb-code
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Repositorio del código del sistema de adquisición de datos con beaglebone para sensores de gas
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
49 Commits
1 Branch
0 Tags
113 KiB
C 97.5%
Shell 2.5%
 
 
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
Go to file
Sayeth c051a650a2 git clone url update 2 months ago
images Upload New File 5 years ago
resources resuorces for uart pins cfg 2 months ago
README.md git clone url update 2 months ago
daq filtered and unfiltered CO2 5 years ago
daq.c header changed again 4 years ago
daq.h main.c 4 years ago
data.dat dada.dat example file added 5 years ago
main.c main.c 4 years ago
uart.c main.c 4 years ago
uart.h main.c 4 years ago

README.md

DAQ System with Beaglebone Black using serial communication

This repositori contains a DAQ program and its C code source to implement a DAQ system with a Beaglebone Black using serial communication with sensors. Sensors used in this system are: GC-0017 (Cabron dioxide), CM-31910 (Carbon monoxide, and temperature) and OX-0052 (Oxigen).

Installing

To get this repositore you just need to clone it into your Beaglebone Black

git clone https://gitea.itmorelia.com/Gas-Sensors/daq-bbb-code

Utilization

Configure UART1, UART2 and UART4 ports with this command

config-uart-pins.sh

Connect sensors to power supply and Beaglebone like next diagram. Diagrama conexiones

Then you can run the program wih this comand*:

./daq <daq duration(h)> <sampling period(s)>

*replace <daq duration(h)> with the total data acquisition time (in hours), and <sampling period(s)> with the time between each measurements acquisition (in seconds).

If you need to recompile the progam you can use gcc program from the terminal.