initial commit

README.md

@@ -0,0 +1,33 @@
+# DAQ System with Beaglebone Black using serial communication
+
+This repositori contains a DAQ program and its C code source to implement a DAQ system with a Beaglebone Black using serial communication with sensors.
+Sensors used in this system are: GC-0017 (Cabron dioxide), CM-31910 (Carbon monoxide, and temperature) and OX-0052 (Oxigen).
+
+### Installing
+
+To get this repositore you just need to clone it in your Beaglebone Black
+
+```
+git clone https://gitea.itmorelia.com/SayethR/Sayeth-DAQ-Code.git
+```
+
+### Utilization
+
+Configure UART1, UART2 and UART4 ports with this command
+
+```
+config-uart-pins.sh
+```
+
+Connect sensors to power supply and Beaglebone like next diagram.
+![Diagrama conexiones](/images/conexion_sensores.png)
+
+Then you can run the program wih this comand*:
+
+```
+./daq <daq duration(h)> <sampling period(s)>
+```
+
+*replace **<daq duration(h)>** with the total data acquisition time (in hours), and **<sampling period(s)>** with the time between each measurements acquisition (in seconds).
+
+If you need to recompile the progam you can use **gcc** program from the terminal.