Update README.md

README.md

@@ -1,6 +1,6 @@
 # DAQ System with Beaglebone Black using serial communication
 
-This repositori contains C code to implement a DAQ system with a Beaglebone Black using serial communication with sensors.
+This repositori contains a DAQ program and its C code source to implement a DAQ system with a Beaglebone Black using serial communication with sensors.
 Sensors used in this system are: GC-0017 (Cabron dioxide), CM-31910 (Carbon monoxide, and temperature) and OX-0052 (Oxigen).
 
 ### Installing
@@ -18,12 +18,14 @@ Configure UART1, UART2 and UART4 ports with this command
 config-uart-pins.sh
 ```
 
-Connect sensors to power supply and Beaglebone like in the next diagram.
+Connect sensors to power supply and Beaglebone like next diagram.
 ![Diagrama conexiones](/images/conexion_sensores.png)
 
-Then you can run the code wih this comand*:
+Then you can run the program wih this comand*:
 
 ```
 ./daq <daq duration(h)> <sampling period(s)>
 ```
 *replace **<daq duration(h)>** with the total data acquisition time (in hours), and **<sampling period(s)>** with the time between each measurements acquisition (in seconds).
+
+If you need to recompile the progam you can use **gcc** program from the terminal.