You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

2.6 KiB

Introduction

Please considers that the BeagleBone Black is a single board computer based on the Cortex-A8 CPU with embedded linux. The board has SDRAM and some low-level peripherals. Thus, at the end of the programming process, any used language will be converted to machine code to be properly interpreted by the CPU. Therefore, the used or selected programming language will depends on the final application usage.

Connect the BeagleBoneBlack

First connect your BeagleBoneBlack (BBB) board by using the USB connection: ssh debian@192.168.6.2 in GNU/Linux or MacOS, and ssh debian@192.168.7.2 in Windows.

Command line tests

First, considers that there are some LEDs already installed on the BBB board. These LEDs are used to let the user knows specific activity on the board, but that can be reprogrammed or used for users tasks.

Next, there is a system called sysfs that allows the OS to gives information and access to devices and drivers that will be only accessible through the Linux Kern space.

Note: this virtual file system is easy to use from Bash, but is not the best and efficient way.

At the command line, go to the sysfs system to access the LEDs:

cd /sys/class/leds
ls -al

you must probably get an answer like this:

drwxr-xr-x  2 root root 0 Jan  1 00:00 .
drwxr-xr-x 48 root root 0 Jan  1 00:00 ..
lrwxrwxrwx  1 root root 0 Jan  1 00:00 beaglebone:green:usr0 -> ../../devices/ocp.2/gpio-leds.7/leds/beaglebone:green:usr0
lrwxrwxrwx  1 root root 0 Jan  1 00:00 beaglebone:green:usr1 -> ../../devices/ocp.2/gpio-leds.7/leds/beaglebone:green:usr1
lrwxrwxrwx  1 root root 0 Jan  1 00:00 beaglebone:green:usr2 -> ../../devices/ocp.2/gpio-leds.7/leds/beaglebone:green:usr2
lrwxrwxrwx  1 root root 0 Jan  1 00:00 beaglebone:green:usr3 -> ../../devices/ocp.2/gpio-leds.7/leds/beaglebone:green:usr3

there are some symbolic links the real directions and can be used to test our LED. Thus, go inside the folder/file beaglebone:green:usr0 and prints out the contents of the file trigger by:

cd beaglebone:green:usr0
more trigger
none nand-disk mmc0 mmc1 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient

that means the heartbeat is the option that triggers the blinking activity.

Then, if we want to stop this triggering and manage the LED activity, let us follow the next steps:

echo none > trigger
echo 1 > brightness
echo 0 > brightness

thus, you must probably observe that the LED turns on and off with the 1 or 0 values, respectively.

Can you try different options???? Can you handle the other LEDs???? Can you make it blink??

Try by yourself please!