starting the decarb analysis

session-decarb/Readme.md

@@ -0,0 +1,10 @@
+# General procedure
+
+- `Set Scale` 100um -> 171 px
+- `Set Measurements...` bounding rectangle, display label, Decimals 4, Redirect none
+- `Measure` and `Clear Measurements` to produce a new and clear measuremens table
+- Use the `Straight` tool to draw a line thta fits into the decarburated area
+- Press `^+m` to add the measurement into the table
+- Repeat the process at least 50 times
+
+![Example of measurements.](measurements-example.jpg)

session-decarb/example.csv

@@ -0,0 +1,14 @@
+ ,Label,Angle,Length
+1,1a_1_5x_D.png,-92.7792,60.1290
+2,1a_1_5x_D.png,-91.2730,52.4911
+3,1a_1_5x_D.png,-90.6228,53.6475
+4,1a_1_5x_D.png,-91.9092,52.5073
+5,1a_1_5x_D.png,-88.5498,46.0789
+6,1a_1_5x_D.png,-92.3137,57.7730
+7,1a_1_5x_D.png,-90.9793,68.2315
+8,1a_1_5x_D.png,-90.9793,68.2315
+9,1a_1_5x_D.png,-92.2680,58.9383
+10,1a_1_5x_D.png,-91.1691,57.1548
+11,1a_1_5x_D.png,-93.0394,65.9820
+12,1a_1_5x_D.png,-91.1812,56.5718
+13,1a_1_5x_D.png,-90.4276,78.1363